Wheelie Bin Number Sticker Fitting Guide
Wash the surface you are applying the stickers to. 
Dry the surface. 
Apply some masking tap to the top edge of the sticker. 
Position your sticker using the masking tape. 
When you are happy with the position, proceed to the next step. 
Using the masking tape as a hinge, flip the sticker upwards. 
Carefully peel the backing paper away from the application tape. 
Flip the sticker back down holding the application tape and sticker away from the bin surface. 
Hold the sticker away from the bin surface at an angle and start pushing the sticker down from the top with a squeegee or credit card. 
Continue from the top down until the complete sticker has been applied. 
Peel the application tape from one corner, leaving the sticker behind. 
Hold the application tape flat against the sticker when peeling it off. 
All done!